LV/FO Cable Splice Kit

IEP, a Malaysia-based industrial electrical power products, electrical distribution system and power distribution equipment, provides a variety of solution across all industries for indoor and outdoor application, ranging from extra low voltage, low voltage (LV), medium voltage (6.6KV/11KV/22KV/35KV).



IEP DSG-CANUSA 1 kV Cable Tap Splice Kit
Adhesive lined, heat shrink wraparound sleeve that is closed with a flexible stainless-steel locking channel. Used for making in-line Y or H parallel splices on cable up to 1000 V without cutting the main or run cable.

Features and Benefits
• Provides water tight seal upon recovery
• Offers mechanical durability
• Suitable for connecting Main and Tap runs to 500 kcmil size
• Accommodates compression and split bolt connectors
• High shrink ratio covers irregular shapes
• High impact and abrasion resistance
• Application procedure is quick, simple and clean
• Steel channel provides permanent closure system
• Installation temperature range: -15°C to +50°C

Typical Applications
• Cable tap splicing
• General re-jacketing and sealing of electrical cables


A specially designed crosslinked polyolefin tubing system, with meltable liner, providing strength and protection to optical fibre splices.


– Single-holed (preshrunk) ends eliminate improper fibre threading
– Smooth, deburred stainless steel reinforcing member ends decrease the risk of fibre damage during installation
– Extended liner length prevents contact between the fibre and the backbone
– Clear sleeve design permits easy centering of splice before heating
– Continuous Operating Temperature: -20°C to 60°C
– Shrink Temperature: 90°C


Adhesive Lined Cross -linked Polyolefin
Adhesive lined heat shrink specifically designed to insulate, seal and protect in-line splices in automotive wire harnesses and electronic assemblies.

Features and Benefits
• 4:1 shrink ratio to fit varying splice configurations and substrate profiles
• Seals and protects against water, moisture and chemical ingress
• Adhesive bonds readily to PVC, XLPE and PP-EPDM cable jackets
• Shrinks rapidly for quick installation
• Use with DERAY® FST shrink ovens for best performance
• Continuous operating temperature: -55°C to 125°C
• Shrink temperature: 125°C

• Approved to all major Automotive OEM splice sealing specifications

Typical Applications
• Environmental sealing of in-line splices
• Sealing and strain relief of connectors and terminals
• Abrasion protection and electrical insulation of automotive wiring harness splices


Underground Feeder (UF) Cable Splice Kits
UF Cable Splice Kits are used to provide a reliable yet simple method of connecting 600 V rated UF cables rangi ng from #14/2 with ground up to #8/3 with ground. Heavy wall, adhesive lined heat shrink tubing provides an effective, moisture proof seal that is suitable for submersible and direct burial splice applications.

Features and Benefits
• Outer tubing sleeve provides excellent abrasion resistance
• Accommodates #14 to #8 AWG UF type cables
• Heat activated seal ensures maximum protection against moisture ingress
• Quick and easy installation
• Rated for 600 V

• UL 486D listed for direct burial applications

Typical Applications
• Irrigation systems
• Splicing of underground feeder cables