Firestop Cable Coating
IEP, a Malaysia-based industrial electrical power products, electrical distribution system and power distribution equipment, provides one stop solution fully certified Passive Fire Stop by FM, UL or BS and local authority, Bomba. The IEP Passive Fire Stop solution covers all applications from electrical, mechanical, PVC or metal piping, ducting, fire damper, fire rated wall, floor and riser.
IEP SVT PYRO-SAFE FLAMMOTECT-A ablative firestop cable coating
IEP SVT Firestop Cable Coating for cable systems
Cable systems of various sizes and types are found in buildings today. These systems are numerous in public buildings, industrial facilities and power stations etc., as are their uses. Cable systems run over all floors and supply almost every room. They are usually located on cable support systems behind floors and wall coverings.
Their fundamental role is the distribution and interconnection of energy supplies along with data and communication technology. Alongside the cables used purely for supplying energy, it is the wiring used for information and communication technology which has significantly increased in quantity.
Thanks to the cable structure, all kinds of different material compositions are found in these systems. Many insulations and cable sheaths are flammable.
From a fire prevention perspective, unprotected cable systems are a potential hazard which should not be underestimated. In the event of a fire, electrical cables and cable trays can act like a fuse, allowing the fire to spread in an uncontrolled manner. Thus, firestop cable coating becoming a serious requirement as high risk industry i.e. O&G, Power Plant and facility running under hazardous gas environment.
The combustible cable jacket may result in burning droplets, and also a release of toxic fumes which can lead to life-threatening smoke inhalation.
These fumes can be highly corrosive and can have a destructive impact on technical facilities and other materials.
The IEP SVT firestop cable Coatings is water based dispersion. The firestop cable coatings prevent the flame propagation on cable systems and delay the loss of function caused by short circuit.
Universal protective firestop cable coatings, may be used for cables and cable trays in horizontal and vertical position to prevent the fire spread in case of short circuit or fire from outside.
Prevention of fire propagation in case of short circuit or external fire source.
Highly flexible firestop cable coatings, solvent free, nonhygroscopic, partly absorbing the resulting HCI gases, no hindrance of the heat transfer energized cables.
DNV CERIFICATE NO. E-10065 – according to IEC 60332-3 cat. A and IEC 60332-3-22 for 60 minutes
• GL Certificate Nr. 13 798 – 99 HH – CEI IEC 60332-3-22, Category A: 2000-10; EN 50662-2-2, Category A: 2000-10; DIN EN 50662-2-2 and VDE 0482 Part 266-2-2:2000-09
• FM – Certificate of Compliance Approval Indentification: 3037058 FM Approval class: 3971
• Building material approval Z-19.11-1324
For further information, please contact us.