Kopex Ex Flexible Conduit
IEP, a Malaysia-based industrial electrical power products, provides a variety of explosion proof electrical equipments ranging from Exd, Exde, Exe, Exn, Ex ia Ex p, Ex q, Ex m, etc.
Protection for Critical Wiring in Hazardous Area’s
Kopex International manufactures a wide range of globally approved products including metallic and non metallic conduit and fi ttings along with a full range of conduit accessories.
Current range of high performance products are designed for many highly demanding market sectors including petrochemical, pharmaceutical and offshore industries or indeed any ATEX / IECEx / UL / CSA areas.
IEP Thomas & Betts (T&B) Kopex Non-Metallic Nylon Conduit System
Anti-Static Nylon Conduit and compatible Nickel Plated Brass Fittings approved for use in Exe applications for Zones 1, 2, 21, & 22. Approved for use in ATEX and IECEx areas. Can also be used with Exn & Exi apparatus.
IEP Thomas & Betts (T&B) Kopex Flameproof Gland
Constructed from either brass or stainless steel, with an epoxy resin barrier, the Group I Flameproof Gland is a high quality, high specification product, ideal for Ex I & II 2 GD gas and dust, Exde IIC and Exe II applications, Extb II applications, as well as CSA Class 1 Div 2 hazardous locations.
IEP Thomas & Betts (T&B) Kopex Explosion-Proof Flexible Couplings
- UL Listed for use in hazardous and wet locations
- Corrosion-resistant – ideal for wash down areas
- Flexible bronze construction with arc-resistant inner sleeve and brass fittings
- Terminated with two threaded female end fittings and male close nipples
- No bonding jumper required
Explosion-Proof and Dust- Ignition-Proof for Use in Hazardous Locations
With their flexible design, T&B® XP FlexTM Couplings make it easy to achieve tight bends in conduit systems in confined spaces – or to connect stationary equipment to equipment that moves or vibrates. Their explosion-proof and corrosion-resistant construction mean you can use them with confidence in hazardous and wet locations.
IEP Thomas & Betts (T&B) Kopex Convertors & Accessories
Comprehensive range of Adaptors and Reducers provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and approval of the installation is maintained. Manufactured in the UK, this new range of converters meets the latest ATEX / IECEx & CSA / UL standards. This means that all the standards are marked on the product around the main body. This allows for them to be seen easily once installed, a key component of the new standard.
Enlargers (/E) are used where the thread size of the Female side of the device is larger than the male side.
Reducers (/R) are used where the thread size of the female side of device is smaller than the male side.
Thread Converters (/TC) are used where a conversion is required between thread types, e.g Metric to PG.
Kopex’s Enlargers, Reducers and thread converters are designed for hazardous area applications and are certified to protection concepts Exd “Flameproof” and Exe “Increased Safety” for use in Zone 1, 2, 2.1, 2.2 applications. Under NEC Class I Div1 ABCD Class II Div1 EFG.