BAND-IT Hand Tools

IEP, a Malaysia-based industrial electrical power products, electrical distribution system and power distribution equipment, provides a variety of solution across all industries for indoor and outdoor application, ranging from extra low voltage, low voltage (LV), medium voltage (6.6KV/11KV/22KV/35KV).

IEP Band-IT Tool Distributor for Band-IT Malaysia Hand & Power Tools and stockiest. Band-IT products ranging Band-IT various installation tools, Stainless Steel Band, All Purpose Band, Cable Ties are amount the hot sellable range for heavy duty industrial application. IEP has been serving Malaysia market on Band-IT products for more than 10 years now.

Enquire Now
FeaturesCatalogues
IEP Band-IT Tool Distributor for Band-IT Malaysia HAND TOOLS
IEP Band-IT C00169 Standard Banding Tool

Use with

  • Band & Buckle
  • BAND-FAST®

IEP BAND-IT’s standard tool with an adapter built in for Junior® Smooth ID clamps. For use on band widths of 1/4″ to 3/4″ (.015″ – .030″ thickness).

IEP Band-IT J05069 Junior® Heavy Duty Adapter

Use with

  • BAND-IT® Tool on the BAND-IT® Junior® Smooth ID Preformed Clamps
IEP Band-IT J00169 Junior® Clamp Adapter

Use with

  • BAND-IT® Tool on the BAND-IT® Junior® Smooth ID Preformed Clamps

Used only with the C00169 BAND-IT® Tool to install Junior® Smooth I.D. Preformed Clamps for hose assembly when a vise in not available.

IEP Band-IT C00269 Junior® Preformed Clamp Tool

Use with

  • BAND-IT® Junior® Smooth ID Preformed Clamps

Use to apply Junior® Preformed clamps and BAND-IT® Junior® Smooth ID
Clamps. Tool performs best when used in a vice on band widths over 1/2″.

IEP Band-IT C00369 Heavy Duty Banding Tool

Use with

  • BAND-FAST® & Roll Band

The IEP Band-IT C00369 is a heavy duty version of the C00169 tool. Primarily designed for thicker materials and is not recommended for band widths 0.015″ or 0.020″.
This tool can be used for 0.044” X ¾” wide Giant Band. Tool will tension beyond the limits of the 3300 lbs of force to yield ¾” wide 201SS Giant Band.

IEP Band-IT G40269 Giant Banding Tool

Use with

  • BAND-FAST® & Roll Band

The IEP Band-IT G40269 is the strongest BAND-IT hand tool. This tool is designed for use with ¾”, 1″, 1-¼” width X .044″ thick Giant Band & Buckle. Tool will tension beyond the limits of the 5500 lbs of force to yield 201Stainless Steel Giant Band material.

IEP Band-IT T30069 Center Punch Tool

Used to apply IEP BAND-IT® 3/8″ and 5/8″ Center Punch Clamps, 201 Stainless Steel Band and Galvanized Carbon Steel Clamps.

IEP Band-IT S03869 Center Punch Tool

Easy to use ratchet drive can be switched to use either the 3/8″ wide or 5/8″ wide slots of this pocket style tool.

IEP Band-IT C08569 Bantam Strapping Tool

The IEP Band-IT C08569 Bantam Strapping Tool is a light duty ratchet tool designed for palletizing and packaging. Similar to the C07569.

IEP Band-IT C40099 Rachet Tool

The IEP Band-IT C40099 Rachet Tool is a ratchet tool designed for the band and buckle systems excelling in palletizing and general banding. This tool works best on coated or painted band because of its gripping mechanism.

IEP Band-IT J02069 Pok-It II Tool with Cutter

The IEP Band-IT J02069 Pok-It II Tool with Cutter has a compact design and ease of use to install 3/16″ – 3/8″ band and buckle and BAND-IT Jr. clamps. The ratchet design enables a quick strong tensioning for narrow band clamps.

IEP Band-IT CB1000

Use with

  • Ball-Lok Ties
  • Ball-LoktTM Ties
  • Multi-Lok Ties

IEP BAND-IT® CB1000 cable bundling tool is very compact and rugged! It’s the ideal hand tool for installing heavy duty self locking stainless steel cable ties up to 16mm in size.

  • Heavy duty 4140 Chromoly Construction can tension up to 1,000lbs
  • Nose design gives flush cut-off
  • X-Style winding mandrel allows easy clamp tail insertion
  • Ergonomically designed handle provides greater comfort
  • 3 way handle adjusts for one or two-handed tensioning
IEP Band-IT XE9229 Tensioning Tool

Tensions and cuts off Ball-Lok, Ball-Lokt™ and Multi-Lok ties up to 12mm wide regardless of material or coating.

IEP Band-IT C07569 Bantam Tool

IEP BAND-IT® Bantam tool is a compact, lightweight, ratchet action tool with built in cutter.

  • 3 way handle adjusts for one or two-handed tensioning
  • Zinc plated for corrosion resistance
  • Useful in tight areas with minimal access
  • Designed for easy loading and removing of material
  • Use with coated and uncoated BAND-IT® ties or Coated Band up to 19mm wide.
IEP Band-IT K50289 Ball-Lok Tool

Use with

  • Ball-Lok Ties
  • Ball-LoktTM Ties

Install Ball-Lok and Ball-LoktTM stainless steel ties (up to 7.9mm wide) quickly and easily with the lightweight, portable Ball-Lok tool with adjustable tension, side loading and automatic tail cut-off.

IEP Band-IT M50389 Multi-Lok Hand Tool

Use with

  • Multi-Lok Ties

Quickly, easily and consistently applies any size Multi-Lok ties. Simply adjust the Multi-Lok tool for the desired tension, slip the Multi-Lok in the slot, or side load, and squeeze the handle. When the proper tension is reached, the Multi-Lok tool automatically cuts the tail off flush with the buckle.

IEP Band-IT A91079 Mini Tie-Lok II Tool

Use with

  • 0.177″ wide (4.5mm) Mini Tie-Lok® Ties

For applying 0.177” wide smooth ID Mini Tie-Lok® ties for cable bundling, hose bundling and identification tagging. Forms unique dimple lock with a strong locking force and cuts off the excess band flush with top of buckle so the completed lock is smooth and not sharp.

  • Forms dimple lock with a strong locking force in excess of 100 pounds (45 Kg)
  • Adjustable controlled tension with repeatable results
  • Easy to use, lightweight, compact design
IEP Band-IT A92079 Tie-Lok® II Tool

Use with

  • 1/4″ wide (6.35mm) Tie-Lok® Ties

Applies 1/4” wide smooth ID Tie-Lok® ties used in cable bundling, hose bundling, CV boot installation and identification tagging. Locks tie with the patented Tie-Lok® and cuts off excess band flush with top of buckle so the completed lock is smooth and not sharp.

  • Forms dimple lock with a strong locking force in excess of 250 pounds (130 Kg)
  • Adjustable controlled tension with repeatable results
  • Easy to use, lightweight, compact design
IEP Band-IT TL3800 Tie-Lok® Tool

Use with

  • Tie-Lok® Stainless Steel Ties in 3/8″ width (9.53mm) only

The TL3800 Tie-Lok® tool is specifically designed to install 3/8″ wide Tie-Lok® stainless steel ties. Repeatable, controlled tie tension. Punch depth limiter. Light weight, compact design. Cut off produces clean hidden edges.

IEP Band-IT A94079 ULTRA-LOK® Tool

Use with

  • Ultra-Lok® Ties

Applies Smooth ID ULTRA-LOK® ties. Locks tie with patented ULTRA-LOK® cut-off for increased loop tensile strength.

  • Tool will tension clamp up to 400lbs of loop tensile strength.
IEP Band-IT AE2009 Tool

The AE2009 hand tool is used for tensioning BAND-IT® cable ties. Use with: BAND-IT Ties, Ball-lok Ties, Ball-LoktTM Ties and Multi-Lok Ties.

IEP Band-IT AE2019 Tool

The AE2019 Tensioning Hook is used for tensioning BAND-IT® cable ties.
Use with: BAND-IT Ties, Ball-lok Ties, Ball-LoktTM Ties and Multi-Lok Ties.

IEP Band-IT UL9010 ULTRA-LOK® Corded Tool

Use with

  • Ultra-Lok® Band & Preformed Clamps

Ideal for hose clamping. Electric ULTRA-LOK® Tool clamps 3/4” or 1/2” ULTRALOK® band and ULTRA-LOK® preformed clamps. Designed for consistent repeatable tensioning. Adjustable speed and torque. Clamps can be applied
four times faster than conventional clamps. Forms lock under full tension. Shear plate available to convert tool from 3/4” to 1/2” ULTRA-LOK® clamps.

IEP Band-IT UL4000-D ULTRA-LOK® Cordless Tool

Use with

  • Ultra-Lok® Band & Preformed Clamps

Ideal for mobile installations. Now powered with a Lithium-ion battery, with longer charge and battery life, the UL4000-D battery charge lasts longer with consistent peak performance through the life of the battery.

IEP Band-IT IT Series Tool

Use with

  • BAND-IT® Tie-Lok® Ties, and Junior® Smooth ID Preformed Clamps

The IT Series Tool (with air hose and regulator) is a hand held tool used for repeatable high production environments.

  • Can be fixtured into production system
  • Variety of head configurations that allow installation of
    • .177″, 1/4″ and 3/8″ Tie-Lok®
    • 1/4″ Universal Clamps
    • 1/4″ and 3/8″ Jr.® Smooth ID Clamps
  • Ergonomic design for ease of use by hand
  • Heavy-duty cut-off and tensioning components
  • Durable pneumatic system
  • Easy to maintain

Available Versions.

  • IT0750 For all .177″ Mini Tie-Lok® Ties
  • IT1000 For all 1/4″ Tie-Lok® Ties and 1/4″ Universal Clamps
  • IT2000 For all 1/4″ BAND-IT Junior® Clamps
  • IT5000 For all 3/8″ BAND-IT Junior® Clamps
  • IT6000 For all 3/8″ Tie-Lok® Ties
IEP Band-IT Tool Distributor for Band-IT Malaysia POWER TOOLS
IEP Band-IT S75099 Pneumatic Junior® Clamp Application Tool

Use with

  • BAND-IT® Junior® Smooth ID Preformed Clamps

The “Standard Air Tool”. The foot controlled standard air tool applies the complete range of BAND-IT Junior® and Junior® Smooth ID preformed clamps.

IEP Band-IT S35099 Pneumatic Junior® Clamp Automatic Air Tool

Use with

  • BAND-IT® Junior® Smooth ID Preformed Clamps

For high volume production clamping of all widths and diameter sizes of BAND-IT Junior® Smooth ID and Junior® preformed clamps. Automatically tensions and cuts off clamp tail after roll-up and lock.

IEP Band-IT SM1700 Pneumatic Automatic Center Punch Clamp Air Tool

Use with

  • BAND-IT® Center Punch Preformed Clamps

Designed to install BAND-IT® Center Punch 5/8″ wide preformed clamps, made from 201 Stainless Steel and Galvanized Carbon Steel. Automatically tensions and cuts off clamp tail.